BEKA EP-1 User Manual

BAL_2152_EP1_Central grease lubrication pump_0816_EN EDV-Nr. 1090200430
14. Signals:
The pump‘s functions are indicated by two LEDs
(green/red) in the inspection window of the motor
housing of the pump, whereas the red LED always
indicates an error in the program sequence.
Red LED error indicator
Green LED function indicator
In order to activate permanent lubrication for service purposes in the mode “time control”, the
lubrication time has to be set on a higher value than the cycle time.
Signals
Standby: 1,5 sec.
ON
OFF
OFF
ON
LED red
LED green
LED green
During whole lubrication
ON
OFF
OFF
ON
LED red
LED red
Until reservoir is refilled
ON
OFF
ON
OFF
LED green
LED red
1 sec.
1 sec.
OFF
ON
ON
OFF
LED green
LED red
1 sec.
1 sec.
OFF
ON
ON
OFF
LED green
LED green
LED red
ON
OFF
1 sec.
1 sec.
OFF
ON
LED green
LED red
1 sec.
1 sec.
ON
OFF
ON
OFF
LED red
0,5 sec.
0,5 sec.
ON
OFF
ON
OFF
LED green
BEKA-troniX1
X
X
X
X
X
X
X
Function
Standby
indicator
Lubrication
sequence
Grease level
error
Excess
pressure
error
Revolution
error
Stroke error
Test
lubrication
Memory error
EP-tronic
X
X
X
X
X
X
X
X
EP-tronic T1
X
X
X
33
EN
BEKA 2016 All rights reserved!

BEKA EP-1 Specifications

General

Brand	BEKA
Model	EP-1
Category	Water Pump
Language	English