BEKA 2016 All rights reserved!
...a product of BEKA
BAL_2152_EP1_Central grease lubrication pump_0816_EN EDV-Nr. 1090200430
4
EN
Declaration of incorporation for incomplete machinery
(acc. to EC-directive 2006/42/EG)
The manufacturer: BAIER + KÖPPEL GMBH+CO. KG
Beethovenstrasse 14
91257 Pegnitz / Germany
Tel.: +49 9241 729-0
declares hereby, that the following partly completed machinery:
Product description: FETTSCHMIERPUMPE
Type designation: EP-1, FKGGM_EP
Article number: 2018...; 2037...; 2152...; 2157...; 2175...; 2183...; 2184...
Serial number: from 930000 to 999999
is complying with all essential requirements of the above mentioned machinery
directives (2006/42/EG):
Annex I, article 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, and 1.5.1.
The following coordinated standards have been used:
DIN EN 809
DIN EN ISO 12000
The following other specifications and standards have been used:
VDE 0530
The protection targets of the directive for have beenelectric equipment 2006/95/EG
observed according to the annex I, no. 1.5.1 of the machine directive.
The incomplete machine may only be put into service as soon as there has been stated
that the machine, into which the incomplete machine shall be installed, responds to the
determinations of the machine directive (2006/42/EG).
The special documentation that responds to the machine, has been prepared according to
annex VII part B.
The manufacturer (documentation department, phone +49 9241 729-779, email:
tb3@beka-lube.de) obliges itself to pass on electronically the special documentation for
partly completed machinery to individual national authorities upon request.
Pegnitz, 27.03.2013
ppa. A. Zapf (sales manager)
To Next Page
Loading...
Need help?
General
