BAL_2152_EP1_Central grease lubrication pump_0816_EN EDV-Nr. 1090200430
Pump:
max. operating pressure: 350 bar
Adjustment of overpressure valve: 280 bar
Operating temperature: -35° C to + 0° C7
Reservoir size :
Transparent reservoir: 1,9 kg, 2,5 kg, 4 kg, 8 kg or 16 kg
Steel reservoir: 2 kg or 4 kg
Direction of agitator blade: counter-clockwise
Installation position: reservoir in vertical position
Output rate: depending on pump element
Protection type: IP5K9K at DIN 40050
Weight: EP-1, FKGGM-EP DC: approx. 5.1 kg
FKGGM-EP with PSU: approx. 5.8 kg
Control units BEKA-troniX1, EP-tronic, EP-tronic T1:
Operating voltage: 10 to 60 V DC
Max. current load: I = 6 A
Fuse (not including in device): F 6.3 A (5x20) medium
Signal lamp outlet: I = 0.4 A
max.
Operating temperature: -35° C to +7 ° C0
Sound pressure level: < 70dB(A)
Control unit EP-T2:
Operating voltage: 10 to 33 V DC
Max. current load: I = 6 A
Fuse (not included in device): F 6.3 A (5x20) medium
Signal lamp outlet: I = 0.4 A
Operating temperature: -35° C to +7 ° C0
9
EN
BEKA 2016 All rights reserved!
To Next Page
Loading...
Need help?
General
