Bell OH-58A - Page 14

TM 55-1520-228-BO
LIST OF ILLUSTRATIONS (Cont)
Figure
Title
Page
4-23
4-24
4-25
4-26
4-27
4-28
4-29
4-30
5-1
5-2
5-3
5-4
5-5
6-1
6-2
6-3
6-4
6-5
6-6
6-7
6-8
7-1
7-2
7-3
7-4
7-5
8-1
8-2
8-3
9-1
9-2
9-3
9-4
9-5
9-6
9-7
9-8
,9-9
9-10
9-11
9-12
Damaged Honeycomb Core Panel, Small Damage to One Skin
and Core... . . . . . . . . . . . . . . . . . . . . . . .
Damaged Honeycomb Core Panel, 2-8 Inch Damage - One Skin
and Core. . . . . . . . . . . . . . . . . . . . . . . . .
Repaired Honeycomb Core Panel, 2-8 Inch Damage - One Skin
and Core. . . . . . . . . . . . . . . . . . . . . . . . . .
Damaged Repair,
Accessible One Side Only . . . . . . . . . .
Patch Plates, One Side Accessible Repair . . . . . . . . . .
Repair of Honeycomb Core Panel,
Damage Over 8 Inches - Both
Skins and Core. . . . . . . . . . . . . . . . . . . . . . .
Fracture Lacing with Safety Wire . . . . . . . . . . . . . .
Tail Boom Skin Damage. . . . . . . . . . . . . . . . . . . .
Landing Gear and Support Installation. . . . . . . . . . . .
Skid Tube Damage Zones. . . . . . . . . . . . . . . . . . .
Skid Repair. . . . . . . . . . . . . . . . . . . . . . . . .
Clamp Repair. . . . . . . . . . . . . . . . . . . . . . . .
Fabricated Clamp. . . . . . . . . . . . . . . . . . . . . .
T63 Series Engine. . . . . . . . . . . . . . . . . . . . . .
Blocking Plate Installation. . . . . . . . . . . . . . . . .
Double-Check Valve System, Possible Alternatives . . . . . .
Wood Plug. . . . . . . . . . . . . . . . . . . . . . . . . .
Sealant for Small Holes... . . . . . . . . . . . . . . . .
Repair Using Screw, Washer and Gasket. . . . . . . . . . . .
Hose Assembly, Sealant, Nut, and Bolt. . . . . . . . . . . .
Sheet Metal with Sealant and/or Cherry Rivets. . . . . . . .
Main Rotor System. . . . . . . . . . . . . . . . . . . . . .
Tail Rotor System. . . . . . . . . . . . . . . . . . . . . .
Rotor Blades, Damage Sensitive Areas . . . . . . . . . . . .
Rotor Blade Repair,
Application of Tape. . . . . . . . . . .
Repair Areas
- Main Rotor B1ades . . . . . . . . . . . . . .
Drive Train System (Sheet 1 of 4). . . . . . . . . . . . .
External Components - Transmission Oil System. . . . . . . .
Flex Duct Repair (Sheet 1 of 2) . . . . . . . . . . . . . . .
Hydraulic System. . . . . . . . . . . . . . . . . . . . . .
Hydraulic System Schematic . . . . . . . . . . . . . . . . .
Two-Part Fitting. . . . . . . . . . . . . . . . . . . . . .
Four-Part Fitting. . . . . . . . . . . . . . . . . . . . . .
Using Tube Cutter. . . . . . . . . . . . . . . . . . . . . .
Properly Burred Tubing . . . . . . . . . . . . . . . . . . .
Damaged Tube Section-Straight Tube . . . . . . . . . . . . .
Splice Repair Assembly . . . . . . . . . . . . . . . . . . .
Repair Fitting and Tube Installation . . . . . . . . . . . .
Damaged Tube Section-Complex Bends . . . . . . . . . . . . .
Splice Adapter Assembly Installation . . . . . . . . . . . .
Installation of Socket and Sleeve. . . . . . . . . . . . . .
4-64
4-64
4-64
4-66
4-66
4-67
4-69
4-70
5-2
5-2
5-5
5-5
5-6
6-2
6-5
6-7
6-8
6-9
6-9
6-10
6-12
7-2
7-3
7-5
7-7
7-8
8-2
8-8
8-9
9-2
9-3
9-4
9-5
9-5
9-7
9-7
9-8
9-8
9-10
9-10
9-12
iv