60 Maintenance
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer.
Total (equivalent) lamp hours = 1.5 x (hours used in Normal mode) + 1 x (hours used in
Economic mode)
To obtain the lamp hour information:
1.Press and then use the arrow keys (///) to go to Information
(while under the Basic OSD menu) or Settings > Information (while under the
Advanced OSD menu).
2. The LED Usage Time information displays.
3. Press to exit.
or
1. Under the Advanced OSD menu, press and then use the arrow keys ( / /
/) to go to System Setup : Advanced > Lamp Settings.
2. Press to display the Lamp Settings window.
3. Use to select Lamp Timer and press . The Lamp Timer information
displays.
4. Press to exit.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you can
do the following settings via the Advanced OSD menu.
To access the Advanced OSD menu, see page 37 for details.
CH100_EN.book Page 60 Wednesday, March 2, 2016 11:54 AM
To Next Page
Loading...
