Positioning your projector20
There is 5% tolerance among these numbers due to optical component variations. BenQ
recommends that if you intend to permanently install the projector, you should physically test
the projection size and distance using the actual projector before you permanently install it, so
as to make allowance for this projector's optical characteristics. This will help you determine
the exact mounting position so that it best suits your installation location.
250 (6350) 3113 5535 7693 9630 11567 311 747
300 (7620) 3736 6641 9232 11556 13881 374 897
325 (8254) 4047 7194 10000 - - 405 971
Screen dimensions Projection distance <D> [mm] Lowest/Highest
lens position <E>
[mm]
Diagonal <A>
[inch (mm)]
Heitht
<B>
[mm]
Width
<C>
[mm]
Min
distance
(with max
zoom)
avg
Min
distance
(with min
zoom)
(min.) (max.)
BenQ W1300.book Page 20 Thursday, August 29, 2013 2:07 PM
To Next Page
