BenQ W1300 - Page 57

Operation 57
The Information menu shows you the current operating status of the projector.
6. Information menu
Current
System
Status
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the Preset menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
3D Format
Shows the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version
Displays the firmware version of the projector.
FUNCTION DESCRIPTION
BenQ W1300.book Page 57 Thursday, August 29, 2013 2:07 PM