BENSHAW RSi SG Series User Manual

Chapter 4 - Operation
4-5
Parameter Navigation: Pressing the [SHIFT] key at any time moves directly to the main screen of the DRV
group. Pressing the [MODE] key moves forward through the groups. Pressing the [ENTER] key moves
reverse through the groups.
Drive Group
FUN Group AFN Group I/O Group
Note: Actual parameters may vary due to software versions.
DRV►T/K 0.0 A
00 STP 60.00Hz
FUN► Jump code
00 1
AFN► Jump code
00 30
MODE
◄
FUN►Run prohibit
03 None
AFN► Last trip-1
01 -------
I/O► V1 filter
01 10 ms
DRV► Dec. time
02 20.0 sec
FUN►Acc. pattern
05 Linear
AFN► Last trip-2
02 -------
I/O► V1 volt x1
02 0.00 V
FUN►Dec. pattern
06 Linear
AFN► Last trip-3
03
-------
I/O► V1 freq y1
03 0.00 Hz
DRV► Freq mode
04 Ke
y
Pad-1
FUN► Stop mode
07 Decel
AFN► Last trip-4
04 -------
I/O► V1 volt x2
04 10.00 V
DRV► Rated Motor
05 Current
FUN► DcSt value
08 50 %
AFN► Last trip-5
05 -------
I/O► V1 freq y2
05 60.00 Hz
FUN► Stall Level
60 150 %
AFN► Para. lock
94 0
I/O► S0 mode
70 Fre
q
uenc
y
MODE
MODE
MODE
MODE
I/O► Jump code
00 1
►
MODE
◄ ►
MODE
◄ ►
MODE
◄ ►
MODE
◄ ► ◄ ► ◄ ► ◄ ►
◄ ► ◄ ► ◄ ► ◄ ►
◄ ► ◄ ► ◄ ► ◄ ►
◄ ► ◄ ► ◄ ► ◄ ►
◄ ► ◄ ► ◄ ►
DRV► Drive mode
03 Fx/Rx-1
DRV► Fault
12 -------
DRV► Acc. time
01 10.0 sec
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
◄ ►

BENSHAW RSi SG Series Specifications

General

Brand	BENSHAW
Model	RSi SG Series
Category	DC Drives
Language	English