BENSHAW RSi SG Series - Chapter 1. Basic Information

1-1
Chapter1. BasicInformation
1.1 UsingThisManual
This manual is divided into 10 sections.
1) Basic Information
2) Drive Ratings and Specifications
3) Installation
4) Operation
5) Parameter Listing
6) Parameter Descriptions
7) Troubleshooting & Maintenance
8) Options
9) RS-485/Modbus-RTU Communications
10) Appendices
1.2 GeneralInformation
Benshaw offers its customers the following:
 Start-up services
 On-site training services
 Technical support
 Detailed documentation
 Replacement parts
NOTE: Information about products and services is available by contacting Benshaw. Refer to section 1.3, Contacting
Benshaw.
Start-Up Services
Benshaw technical field support personnel are available to do startup and conduct on-site training on the drive operations and
troubleshooting.
On-Site Training Services
Benshaw technical field support personnel are available to conduct on-site training on the operations and troubleshooting.
Technical Support
Benshaw technical support personnel are available (at no charge) to answer customer questions and provide technical support
over the telephone.
Documentation
Benshaw provides all customers with an RSi-SG Instruction Manual, Benshaw Publication #890046-00.
All RSi-SG drive documentation is available on-line at http://www.benshaw.cwfc.com.
Replacement Parts
Spare and replacement parts can be purchased from Benshaw. Contact Benshaw for more information.
Publication HistoryRefer to the Revision History located at the end of this manual.