Bernette b77 - 2 Sewing Preparation; Connection and Switching on; Connecting the Machine; Use of the Power Cable (Only Usa;Canada)

Sewing preparation
19
2020-02 EN 5020077.20A.04
2 Sewing preparation
2.1 Connection and Switching on
Connecting the machine
> Insert the power cable into the power cord connection.
> Insert the power cable into the power cord connection.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, contact an electrician to install an appropriate outlet. Do not modify the plug in
any way.
Connecting the foot control
> Insert the cable of the foot control into the foot control connection.