Bernette b77 - 5.2 Dual feed

Creative sewing
52
2020-02 EN 5020077.20A.04
Changing the stitch length
> Turn the «Lower Multifunction knob» to the left to shorten the stitch length.
> Turn the «Lower Multifunction knob» to the right to elongate the stitch length.
> To call up further setting options, touch the icon «Stitch length» (1).
1
Correcting the balance
Different fabrics, threads and stabilizers can affect the programmed stitch patterns so that they cannot be
sewn out correctly. The electronic balance can correct these deviation and the stitch pattern can be adjusted
optimally to the selected fabric.
> Select a stitch pattern or alphabet.
> Sewing stitch pattern.
> Touch the icon «i»-Dialog.
> Touch the icon «Confirm».
– A preview of the stitch pattern is displayed.
> To correct the longitudinal direction of the stitch pattern, turn the «Lower Multifunction knob» until the
preview of the stitch pattern matches the stitch pattern sewn on the fabric.
> Altered balance settings can be saved for each stitch in the «Personal memory».
> Altered balance settings only remain valid until the «clr button» is pressed or the machine is switched off.