Bernette b77 - 2.7 Presser Foot

Sewing preparation
26
2020-02 EN 5020077.20A.04
> Tighten the screw with the screwdriver.
1
2
Inserting the edge/ quilting guide
The seam guide is suitable for sewing parallel lines.
> Insert the edge/quilting guide (1) in the slot (2).
> Adjust the width as desired.
2
1
Having the presser foot sole displayed in the user interface
The recommended presser foot sole for the selected stitch is displayed. Moreover, other optimal presser foot
soles can be displayed.
> Switch the machine on.
> Select the stitch pattern.
– In the icon «Presser foot sole display» the recommended presser foot sole is indicated with a letter.
> Touch the icon «Presser foot sole display».
– Any presser foot soles are displayed.
– A green tick indicates the recommended presser foot sole.
– A yellow star indicates the presser foot soles which can also be used for this stitch for special
purposes.