122 Starting to Embroider
Starting to Embroider With the Start-
Stop-Button on Head Frame
• lower the presser foot
• keep the Start-Stop-button on the head
frame depressed until the embriodery
computer starts
•the embroidery computer will sew
approximately 7 stitches and stop
automatically
•a screen indicates that the thread tail has
to be cut at the beginning of the motif
• raise the presser foot
• cut the thread tail at the beginning of the
motif
• lower the presser foot
•press the Start-Stop-button on head frame
to resume embroidering
Starting to Embroider With Foot Control
• lower the presser foot
•press the foot control
•the embroidery computer will stop
automatically after approx.
7 stitches
•a screen indicates that the thread tail has
to be cut at the beginning of the motif
•release the foot control
• raise the presser foot
• cut the thread tail at the beginning of
motif
• lower the presser foot
• when embroidering with the foot control
always keep it depressed
Interrupting With the Foot Control
• when the embroidery computer is
embroidering, press the Start-Stop-button
on head frame or tap the foot control
lightly
• the embroidery computer will stop
immediately
Completing the Color
• lower the presser foot again
•press the Start-Stop-button on head frame
or the foot control again
• the embroidery computer embroiders all
the sections in the color activated
• the embroidery computer stops
automatically when complete
Changing Color
• the embroidery computer is automatically
ready to embroider the next color
• change color of the upper thread
accordingly
• embroider with the new color
Cutting Thread Ends After Embroidery
• raise the presser foot
•remove the embroidery hoop from the
embroidery arm
• cut threads close to the motif
• carefully remove any connecting threads
from the embroidered area
• take care that the bobbin thread is not cut
too closely to the stitch plate when
removing the embroidery hoop
Embroidery Screen
• after starting to embroider the Embroidery
screen appears
To Next Page
