Bernina 1300MDC - Combining Lettering

60 Lettering - Applications
Combining Lettering
Combining Letters
• open Combi Mode
• select desired letter
• letter appears in Stitch Altering Area and
on bar above Alphabet menu
• cursor is below the letter
• select next letter and touch required button
• second letter appears in Stitch Altering
Area, etc.
Inserting Letters
•a letter is always inserted above the cursor
• cursor must be scrolled up (arrow) to insert
an additional letter at the beginning of
lettering
• activate desired place by selecting required
letter in Stitch Altering Area or scroll to it
• select new letter
• letter is inserted above cursor
Deleting Letters
•a letter is always deleted above the cursor
• activate desired place by selecting required
letter in Stitch Altering Area, or scroll to it
• touch «Delete»
• letter is deleted
• saving and deleting
combinations
Letters
size and type suitable for the fabric selected
cotton, decorative
up (sewing position)
Reverse pattern foot No. 1
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
Alphabets
• individual letters and rows of the same
letter of the same alphabet are sewn in
Single Mode
• letters for names, addresses, words, etc. are
combined and sewn in Combi Mode
Adding Securing function
(4 small securing stitches)
There are different ways to automatically
secure stitching:
1. touch function button before starting to
sew to secure stitching at the beginning
2. program function within a combination
to secure accordingly
Correcting Combinations
87
91
031196.50.04_0507_a630_EN