151Messages
Motif does not fit into the attached hoop
No embroidery module is attached.
Data transfer
Mega-Hoop up
Mega-Hoop center
Mega-Hoop down
Main Motor failed. Check hook system.
Attach a larger embroidery hoop or reduce
the size of the motif
Attach embroidery module to the embroidery
computer.
As soon as the data transfer is compledted,
the messeage will disappear and the selected
function will be carried out.
Move the Mega-Hoop to Upper (1) position.
Move the Mega-Hoop to Middle (2) position.
Move the Mega-Hoop to Lower (3) position.
Remove any remnants of thread from the
hook area/bobbin case.
To Next Page
Loading...
