9Operating Instructions
Slide-on Table
• the slide-on table increases the sewing
surface
•free arm for large tubular items such as
pant legs and waistbands
To Attach
• raise the needle and presser foot
• place the table to the right over the free
arm and press firmly so that it engages on
the fixing cam
To Remove
• raise needle and presser foot
• pull the table out of the fixing cam
•remove to the left
Slide-on Table
Seam Guide
• insert into the groove (underside of table)
from left or right
• it can be adjusted over the whole width of
the table
Scale
• «0» corresponds to the center needle
position
Presser Foot Lifter
• the FHS raises and lowers the presser foot
• push to the right
• the presser foot is raised
• the feed dog is lowered simultaneously
• the feed dog is raised as soon as the first
stitch is sewn
Free Hand System (FHS) Presser Foot Lifter
Attaching the Presser Foot Lifter
• insert into the opening; you should be able
to operate the FHS with your knee in your
normal sitting position
Your dealer can adjust the FHS if
necessary.
To Next Page
