Bernina 880 PLUS - Vari-Overlock Stitch

My BERNINA
25
BERNINA SEWING MACHINE WORKBOOK
VARI-OVERLOCK STITCH
1. Attach Overlock Foot #2/2A to the machine.
2. Select the Vari-Overlock Stitch #3.
3. Engage the Needle Stop Down function if available.
4. Guide the raw edges of the fabric under the pin of the
foot and stitch the two layers together. The stitch will
form over the pin and the edge of the fabric.
Notes:
Using the Overlock Foot and the Vari-Overlock Stitch will
keep the edge of the fabric at, not rolled.
Other stitches that work well with this Presser Foot are the
Stretch Overlock Stitch and the Double Overlock Stitch.
If your machine has Presser Foot Selection (see Page 10 for
details), select Foot #2.
Cotton interlock, 4” x 6”, two pieces
80/12 Universal
(Ballpoint or Stretch may also be used)
Polyester or cotton embroidery thread
As programmed
Overlock Foot #2/2A
(optional accessory for B 770 QE
PLUS, 770 QE, 735, 740)
HOW
Do you know how to:
• Engage the Needle Stop Down feature?
• Position Overlock Foot #2/2A?
• Select the foot in the Presser Foot
Selection?