My BERNINA
27
BERNINA SEWING MACHINE WORKBOOK
BLIND HEM
1. Begin with a basted 2" hem as instructed on previous
page.
2. Select the Blind Stitch #9.
3. Attach the Blindstitch Foot #5 to the machine.
4. Fold the hem back to the right side over the basting
line, exposing the zigzagged edge of the fabric.
5. Sew on the extended hem allowance, keeping the
folded edge next to the guide on the foot.
6. Adjust the stitch width if needed so that the needle
barely stitches into the fold.
7. Unfold the fabric when nished, and notice that the
stitches barely show on the outside of the fabric.
Wool-like fabric or heavy flannel, 6” x 7”
80/12 Universal
Polyester or cotton sewing thread
As programmed
Reverse Pattern Foot #1/1C/1D for
basting
Blindstitch Foot #5 (optional
accessory
for B 770 QE PLUS, 770 QE, 740, 735, 570
QE, 535)
Wrong side
of fabric
Right side of fabric
Wrong side of fabric
HOW
Do you know how to:
• Machine baste?
• Distinguish between Blindstitch Foot #5
and Edgestitch Foot #10/10C/10D?
To Next Page
Loading...
