BERTHOLD TECHNOLOGIES LB 444 - Setup Protocol

04/03 347 LB 444
93
12.4 Setup Protocol
Measuring Point ............................................ Date .......................
Radioactive source: No. ..................... Activity ............... Isotope ..................
Pipeline .................................... mm Material ...................................
Irradiation angle: 90°/45°/30°/others ..................
Product ............................................................
Parameters Range Value
Password
Instrument ID
Program version
Configure instrument
Radiation yes/no
Error mode Hold/continue
Product no. 1/2/3/4
Measuring path cm
Measure mode
Time constant s
Rapid switchover ON/OFF
Σ for radiating interference
0-10
Count rate limit (min) cps
Count rate limit (max) Cps
Current temperature input: 0-20mA or 4-20mA
0/4 mA °C
20 mA °C
Current out for density or
conc.
0-20mA or 4-20mA
0/4 mA
20 mA
Current output error Hold Value: 0-22mA
Relay 2 setup Min or Max:
Hysteresis: 0-10%
Relay 3 setup Min or Max:
Hysteresis 0-10%
Solid density:
Liquid density:
Water TC yes/no
TC1
TC2
Reference temperature
Suspension measurement yes/no
Unit