04/03 347 LB 444
VI
Safety Summary
Electrical Shock Hazard
Disconnect power to ensure that contact with energized part is avoided during installation
and servicing.
Specific Warnings
Never change the installation or the parameter settings without a full knowledge of the
relevant part of this manual, the connected controller and the process, if it is controlled
by this measuring device.
Radiation Protection Instructions
This measuring device utilizes radioactive sources. Local regulations controlling the use of
radioactive sources must be followed. This is the law.
Installation, dismantling, relocation, maintenance, testing involving the radioactive
source or its shielding have to be performed by persons specifically licensed. Radioactive
sources which are not in use have to be stored at a save place which is tamperproof.
To Next Page
Loading...
