EasyManuals Logo

Beta ALP 4.0 User Manual

Beta ALP 4.0
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
1
GENERAL INFORMA
TION
92
GB
KEYS AND LOCKS
The vehicle is supplied with two keys and the related spares for the ignition switch/
steering lock and the crash helmet lock.
WARNING
Do not keep the spare keys in the vehicle. Keep the keys in a safe and easy-to-reach
place. The code number stamped on the keys should be copied on this manual (or
elsewhere) so it can be used to ask for duplicates should both keys be lost.
OFF: Electrical equipment disabled.
ON: The vehicle can be started.
LOCK: Steering lock on.
To lock the handlebar, turn it to
the left, press the key, rotate it
anticlockwise all the way and
then release it.
CRASH HELMET LOCK
Insert the key into the lock located on the left side under the saddle, and then rotate
it anticlockwise to open the crash helmet hook.
IGNITION SWITCH/STEERING LOCK
It controls the ignition circuit and the steering lock.
ON
OFF
LOCK

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta ALP 4.0 and is the answer not in the manual?

Beta ALP 4.0 Specifications

General IconGeneral
Displacement349 cc
Final DriveChain
Rear SuspensionMonoshock
Front BrakeSingle disc, 260 mm
Rear BrakeSingle disc, 220 mm
Front Tire90/90-21
EngineSingle cylinder, 4-stroke

Related product manuals