EasyManuals Logo

Beta ALP 4.0 User Manual

Beta ALP 4.0
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
2
OPERA
TION
114
GB
STARTING THE ENGINE
Rotate the ignition key clockwise and en-
sure that the neutral warning light (N) on
the instrument panel is lit.
IMPORTANT:
Remember, before turning the key, to posi-
tion the light- switch knob in headlight po-
sition (see page 93), so as to reduce bat-
tery consumption as much as possible.
Set the emergency switch on the throttle
control to the (o) position.
Turn fuel cock A:
OFF = closed
ON = open
Pull out starting device knob B, located
on the left side of the carburetor, until the
second click is heard.
Vehicles with electric start only
Pull the clutch lever while pushing the start
button on the throttle control without rotat-
ing the throttle twist grip.
Vehicles with kick-start (optional)
Push down the kick-start sharply with the
foot and then fold back the lever
Wait for about 2 minutes to warm up the
engine without rotating the throttle twist
grip, and then push down starting de-
vice B, pausing after the first click.
A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta ALP 4.0 and is the answer not in the manual?

Beta ALP 4.0 Specifications

General IconGeneral
Displacement349 cc
Final DriveChain
Rear SuspensionMonoshock
Front BrakeSingle disc, 260 mm
Rear BrakeSingle disc, 220 mm
Front Tire90/90-21
EngineSingle cylinder, 4-stroke

Related product manuals