Beta ALP 4.0 User Manual

1
GENERAL INFORMA
TION
103
GB
CAPACITIES
fuel tank ..................................................................................... 10.5 (lt)
fuel type .................................................... petrol (unleaded, with a minimum
octane number of 95 (R.O.N.)
including reserve ............................................................................... 3 (lt)
engine oil capacity.............................................................oil change 1.9 lt
with filter replacement 2.1 lt
overhaul 2.3 lt
motor oil type ........................................................ BARDAHL XTM15W 50 -
average consumption................................................................... 25 Km/lt
FRONT SUSPENSION
Hydraulic fork with Ø 46 mm rods, adjustable rebound and spring preload
Oil content in the gearshift fork stem:
right ........................................................................................... 570 cc
left ............................................................................................. 570 cc
Oil type ........................................................................ Viscosity SAE 7.5
Oil level .......................................................... 180 mm from tube upper rim
Trail .............................................................................. 101 mm (ALP 4.0)
58 mm (MOTARD M4)
REAR SUSPENSION
Single shock absorber with adjustable spring preload
shock absorber travel ......................................................... 83 mm (ALP 4.0)
100 mm (MOTARD M4)
FRONT BRAKE - ALP 4.0
Ø 260 mm disc brake with hydraulic control
FRONT BRAKE - MOTARD M4
Ø 310 mm disc brake with hydraulic control
REAR BRAKE - ALP 4.0/MOTARD M4
Ø 220 mm disc brake with hydraulic control
BRAKE OIL
BARDAHL brake fluid DOT4

Beta ALP 4.0 Specifications

General

Displacement	349 cc
Final Drive	Chain
Rear Suspension	Monoshock
Front Brake	Single disc, 260 mm
Rear Brake	Single disc, 220 mm
Front Tire	90/90-21
Engine	Single cylinder, 4-stroke