Beta ALP 4.0 User Manual

1
GENERAL INFORMA
TION
109
GB
NOTES ON THE BATTERY G
Insert the new battery in the specially designed compartment under the saddle (see
photo) tightening it with the H equipment elastic H.
Connect the black cable terminal to the negative (-) and the red cable to the positive
(+) inserting the red cap protection.
Reassemble the saddle.
HV COIL - STARTING DEVICE
In order to have access to these components, it is necessary to remove the saddle,
the front sides and the tank (see pages 133, 134 for ALP and pages 135, 136 for
MOTARD).
I

Beta ALP 4.0 Specifications

General

Displacement	349 cc
Final Drive	Chain
Rear Suspension	Monoshock
Front Brake	Single disc, 260 mm
Rear Brake	Single disc, 220 mm
Front Tire	90/90-21
Engine	Single cylinder, 4-stroke