Fig. 6.24
6.6 Product container loading
(with machine off)
6.6.1 Loading containers
Filling is possible keeping the containers inserted, and by raising
the upper flap of the distributor (Fig. 6.21) or by extracting each
container.
For granulated coffee in particular it is necessary to close the
closure plat before extracting the container.(Fig.6.22).
remove the covers of each container and load the product
according to the product indicated on the label (Fig.6.23-
Fig.6.24).
pay attention that they there are no clots, avoid pressing the
product and using an excessive quantity, so as to avoid its
aging in relation to the consumption forseen in the time period
between two loadings.
Check the container product capacity in the section TECHNICAL
CHARACTERISTICS.
To Next Page
Loading...
