Bianchi IRIS - Spoon Loading

24
IRIS
Fig. 6.30
Fig. 6.31
Fig. 6.32
6.6.4 Spoon loading
 Remove the metal weight from the spoon dispensing column
(Fig. 6.30)
 insert the spoons with their pack wrapping in the column and
when they are positioned on the bottom cut and remove the
wrapping (Fig. 6.31)
 once the loading is completed put the weight back in the spoon
dispensing column.
 Check that the spoon are cut burr-free, that they are not bent
and that they are all placed horizontally (Fig. 6.32).
The IRIS I models do not have the spoon dispensing column as
the sugar is mixed directly with the products.