BIFFI IMVS2000v2 - Page 10

September 2019
Installation, Operation and Maintenance Manual
MAN720_IMVS2000v2_IOM Rev. 6
MAN720_IMVS2000v2_IOM Rev. 6
General Safety Instructions
Applicable Requirements
CAN/CSA-C22.2 No. 61010-1-12 Safety Requirements for Electrical Equipment
for Measurement,
Control, and Laboratory Use, Part 1:
General Requirements
UL Std. No. 61010-1 (3rd Edition) Safety Requirements for Electrical Equipment
for Measurement,
Control, and Laboratory Use - Part 1:
General Requirements
CAN/CSA-C22.2 No. 0-10 (R2015) Canadian Electrical Code, Part II - General requirements
CAN/CSA-C22.2 No. 60079-0:15 Electrical apparatus for explosive gas atmospheres-
Part 0: General requirements
CAN/CSA-C22.2 No. 60079-1:16 Explosive Atmospheres – Part 1: Equipment Protection
by Flame-proof Enclosures “d”
CAN/CSA-C22.2 No 60079-11:14 Explosive atmospheres — Part 11: Equipment
protection by intrinsic safety “i”
CAN/CSA-C22.2 No 60079-31:15 Explosive atmospheres — Part 31: Equipment
dust ignition protection by enclosure "t"
CAN/CSA-C22.2 No.30-M1986 (2016) Explosion-Proof Enclosures for Use in Class I
Hazardous Locations
CAN/CSA-C22.2 No 25:1966 (R2014) Enclosures for Use in Class II Groups E, F, and G
Hazardous Locations
CAN/CSA C22.2 No 157 Intrinsically safe and non-incendive equipment or use in
Hazardous Locations
ANSI/ISA 60079-0: Ed 6 Electrical Apparatus for Explosive Gas Atmospheres -
Part 0: Equipment - General Requirements
ANSI/ISA 60079-1: Ed 6 Explosive Atmospheres - Part 1: Equipment Protection
by Flame-proof Enclosures “d”
ANSI/ISA 60079-11: Ed 6.2 Explosive atmospheres - Part 11: Equipment protection
by intrinsic safety “i”
ANSI/ISA 60079-31: Ed 6 Explosive Atmospheres - Part 31: Equipment Dust
Ignition Protection by Enclosure “t”
FM 3600:2011 Electrical Equipment for Use in Hazardous (Classified)
Locations General Requirements
FM 3615:2006 Explosionproof Electrical Equipment,
General Requirements
FM 3610:2015 Intrinsically Safe Apparatus for Use in
Class I, II and III, Division 1
FM 3616:2011 Dust-Ignition proof Electrical Equipment,
General Requirements
CSA C22.2 No. 94.2-15 / UL50E Enclosures for Electrical Equipment,
Environmental Considerations
6
Section 2: General Safety Instructions