September 2019
Installation, Operation and Maintenance Manual
MAN720_IMVS2000v2_IOM Rev. 6
MAN720_IMVS2000v2_IOM Rev. 6
Section 10: Installation – Start-Up
Installation – Start-Up
10.5 Pressure Connections
Figure 34
IMVS2000v2 Pressure Connections
• S1, S2: connections to the actuator cylinder active chamber/chambers
(S1 for single acting actuators, S2 for double acting actuators).
• S3: connection to the process.
10.6 Cables and Electrical Connections
10.6.1 Cables Connection
The sealing of cables and/or conduit entries must be carried out in accordance with National
Standards or the Regulatory Authorities that have certified the IMVS2000v2. Method of sealing and
cable glands must be approved and separately certified for use in hazardous areas.
The ELBS-20 enclosure must be connected to the EARTH trough the External EARTH stud.
92
To Next Page
Loading...