September 2019
Installation, Operation and Maintenance Manual
MAN720_IMVS2000v2_IOM Rev. 6
MAN720_IMVS2000v2_IOM Rev. 6
Section 6: Conguration Parameters
Conguration Parameters
PARAMETERS OF THE “VIEW/SETUP MODE” MENU
PARAMETER NAME DESCRIPTION RANGE
DEFAULT
VALUE
R/W
(1)
AVAILABLE
ON (2) (3)
Clear Alarms List
This command clears the Alarms List.
See Section 8 for details.
Start - C
Local, Serial,
Bus
Reset Alarms
This command “clears” the active alarms.
See Section 5.2.7 and Section 8 for details.
Start - C
Local, Serial,
Bus
Al. PSCL En.
(Alarm PSCL Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No ALR R/W
Local, Serial,
Bus
Al. PSCT En.
(Alarm PSCT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSSB En.
(Alarm PSSB Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSFB En.
(Alarm PSFB Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSST En.
(Alarm PSST Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSFT En.
(Alarm PSFT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSSP En.
(Alarm PSSP Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSSR En.
(Alarm PSSR Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSLB En.
(Alarm PSLB Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSHB En.
(Alarm PSHB Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. PSNM En.
(Alarm PSNM Enabled)
Set as “CFA” it is enabled and associated to the
“PST St.” and to the “CFA St.”
Set as “ALR” it is enabled and it is associated to
the “PST St.” but not to the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR CFA R/W
Local, Serial,
Bus
52