BIGTREETECH Octopus MAX EZ V1.0 User Manual
27
#define ADVANCED_PAUSE_FEATURE // retraction setting of nozzle park
movement and filament purge distance after the print is resumed.
ESP3D
In Marlin, simply set the correct "SERIAL_PORT" and "BAUDRATE". UART3 is
used for ESP8266 communication, so set SERIAL_PORT to 3.
The newest ESP3D firmware can be found at https://github.com/luc-
github/ESP3D, compile your own binary file and rename it to "esp3d.bin", copy it
to the root directory of the SD card, insert into the motherboard and press the
reset button. The bootloader will update the firmware to ESP8266 automatically. If
updated successfully, the file will be renamed to "ESP3D.CUR".
To Next Page
Loading...
Need help?
General
