View customisation
By pressing it is possible to view the completed customisation. The
following data appears on the display, one under the other:
Dn1 where D stands for description and n1 is the general data number
n2 = general data number
<n3> where n3 is the decimal code in the ASCII character
text associated to the general data
CHECK
The DEL key is used to delete the selected element from customisation.
Press ESC to go back to the customisation functions.
When all of the data has been entered, press SAVE to exit the customisation
function and save the completed customisation.
Press ESC to exit the customisation function without saving.
This entry only appears in the menu if there is at least one customisation.
It is possible to reset the customised printouts and/or strings individually, or select
Delete all, to delete all completed customisations simultaneously.
To Next Page
Loading...