Binder CB-S 170 User Manual

Issue 06/2020 Art. No. 7001-0402
Operating Manual
CB-S / CB-S-UL (E7)
CO
2
Incubator
with FPI-sensor system and RD4 controller
Model Model version Art. No.
CB-S 170 CBS170-230V 9040-0189, 9140-0189
CB-S 170-UL CBSUL170-120V 9040-0190, 9140-0190
CB-S 260 CBS260-230V 9040-0191, 9140-0191
CB-S 260-UL CBSUL260-120V 9040-0192, 9140-0192
BINDER GmbH
 Address: Post office box 102, 78502 Tuttlingen, Germany  Phone: +49 7462 2005 0
 Fax: +49 7462 2005 100  Internet: http://www.binder-world.com
 E-mail: info@binder-world.com  Service Hotline: +49 7462 2005 555
 Service Fax: +49 7462 2005 93 555  Service E-Mail: service@binder-world.com
 Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
 Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
 Service Hotline Russia and CIS: +7 495 988 15 16

Binder CB-S 170 Specifications

General

Brand	Binder
Model	CB-S 170
Category	Accessories
Language	English

Summary

1. Safety

1.1 Personnel Qualification

Defines the necessary qualifications for personnel installing, testing, and operating the chamber.

1.2 Operating manual

Instructions on handling and using the operating manual for safe operation.

2. Chamber Description

2.1 Chamber overview

Provides a visual overview of the CO2 incubator CB-S / CB-S-UL.

2.5 Instrument panel

Details the controller display and USB interface on the instrument panel.

3. Completeness of Delivery, Transportation, Storage, and Installation

3.1 Unpacking, and checking equipment and completeness of delivery

Procedure for unpacking and verifying the chamber and its accessories.

3.4 Location of installation and ambient conditions

Specifies requirements for the chamber's installation site and environment.

4. Installation and Connections

4.2 CO2 sensor

Instructions for connecting and general notes regarding the CO2 sensor.

4.4 Gas connection

Details on connecting the CO2 gas supply to the chamber.

4.5 Electrical connection

Guidance on connecting the chamber to the power supply.

5. Functional Overview of the RD4 Chamber Controller

5.1 Menu structure of the controller and access levels

Explains the controller's menu layout and user authorization levels.

6. Start Up

6.1 Turning on the chamber

Step-by-step instructions for powering on the chamber.

6.2 Preset factory parameters

Lists the default settings provided by the manufacturer.

6.4 Altitude of the installation site above sea level

Procedure to set altitude for accurate CO2 concentration calculation.

7. Temperature and CO2 Set-Point Entry

7.1 Temperature set-point entry

Instructions for setting the desired temperature value.

7.2 CO2 set-point entry

Instructions for setting the desired CO2 concentration value.

10. Password

10.2 Assign and modify a password

Guide to setting and changing User and Admin passwords.

11. Temperature Safety Devices

11.2 Overtemperature safety controller class 3.1

Details on the electronic overtemperature safety controller.

12. General Controller Settings

12.1 Selecting the controller’s menu language

Procedure to change the language of the controller interface.

12.3 Setting the current date

Instructions for setting the chamber's current date.

12.4 Setting the current time

Instructions for setting the chamber's current time.

13. Tolerance Range Settings

13.2 Setting the temperature tolerance range

Defining the acceptable deviation for temperature alarms.

13.3 Setting the CO2 tolerance range

Defining the acceptable deviation for CO2 alarms.

15. Notification and Alarm Functions

15.1 Alarm messages

Overview of alarm messages and their causes.

15.4 Measures in case of alarm

Actions to take for specific alarm conditions.

16. Ethernet Network Settings

16.1 Showing the network settings

Accessing and displaying current network configuration details.

16.2 Changing the configuration of the network settings

Procedure for modifying IP address, DNS, gateway, and subnet mask.

17. Data Recorder

17.1 Recorded data

Description of the data stored by the chamber's data recorder.

17.3 Setting the storage rate for the “DL1” recorder data

Configuring the interval for saving recorder data.

18. USB Menu: Data Transfer via USB Interface

18.2 Import function

How to load configuration data from a USB stick.

18.3 Export functions

How to save configuration, recorder, and service data to USB.

19. Reference Measurements

19.1 CO2 reference measuring

Methods for verifying CO2 concentration accuracy.

19.2 Temperature reference measurement

Methods for verifying temperature measurement accuracy.

21. Avoiding Microbial Contamination

21.3 Working and behavior in the lab

Guidelines for personnel practices to prevent contamination.

21.5 Handling the CO2 incubator

General recommendations for handling the incubator to prevent contamination.

22. Cleaning, Decontamination / Disinfection, and Sterilization

22.1 Cleaning

Detailed procedures for cleaning the chamber and its components.

22.2 Decontamination / chemical disinfection of the chamber

Methods for chemical decontamination and disinfection of the chamber.

22.3 Disinfection of the CO2 sensor

Specific instructions for disinfecting the CO2 sensor.

23. Hot-Air Sterilization at 180 °C / 356 °F

23.1 Overview

General description and phases of the hot-air sterilization cycle.

23.2 Performing a hot-air sterilization

Steps and preparations required for conducting hot-air sterilization.

23.3 Starting and running the hot-air sterilization cycle

Procedure for initiating and managing the sterilization cycle.

23.4 Prematurely terminating the sterilization cycle – effects

Information on the consequences of stopping the sterilization early.

24. Maintenance, and Service, Troubleshooting, Repair, Testing

24.1 General information, personnel qualification

Requirements for personnel involved in maintenance and service.

24.2 Maintenance intervals, service

Information on regular maintenance schedules and service.

24.5 Simple troubleshooting

Basic troubleshooting steps for common chamber issues.

25. Disposal

25.1 Disposal of the transport packing

Guidance on how to dispose of packaging materials.

25.2 Decommissioning

Steps for safely taking the chamber out of operation.

25.3 Disposal of the chamber in the Federal Republic of Germany

Regulations for disposing of the chamber in Germany.

26. Technical Description

26.1 Factory calibration and adjustment

Information on the chamber's factory calibration procedures.

26.4 CB-S / CB-S-UL technical data

Provides detailed technical specifications for the chamber models.

26.7 Equipment and options (extract)

Lists standard equipment and available optional accessories.

27. Certificates and Declarations of Conformity

27.1 EU Declaration of Conformity

Official declaration confirming compliance with EU directives.

29. Contamination Clearance Certificate

29.1 For Chambers Located Outside the USA and Canada

Form for declaring safety and health information for international returns.