Menu for telephony in operation as a telephone system 28
For example: The number 0228 / 12345678 - with the extension
00–29 requires input of +4922812345678 in the Point to Point
number field. The PABX extension can be entered in the field
next to/below it.
6. If a Point to Point number is stored, you must enter the PABX
extension in the fields from and to.
For example: The number 0228 / 12345678 – 0 with extension
00–29 requires input of 00 in the first from and 29 in the first to
field.
7. If one or more single call numbers are assigned to the
CompanyFlex SIP Trunk in the configuration portal, you can store
them in the E.164 call number format. You can enter more single
numbers via Add. If no single phone numbers are assigned, this
field remains empty.
For example: The phone number 0228 / 111111111 requires
input of +4922811111111.
Click on Show more to display more Settings.
1. The Activate additional access option allows you to set up
another CompanyFlex SIP Trunk that is used whenever the
primary port is not available. The access data required for this
second port can be found in your contract documents: There you
may find a distinction between Credentials Primary and
Credentials Secondary. To set up the backup port, you only need
to enter the Telephony user name, Telephony password, and
Registration phone number. The outgoing proxy is created
automatically, and the phone numbers remain the same as for
the primary port.
If a second Internet connection is available for the backup
telephony connection, it will be used. Which Internet connection
is actually used is displayed under SIP interface link. In the
Telephony > Options menu, you can specify which interface is
used, if necessary.
2. In the Encryption section, you can specify whether telephone
connections are to be established preferentially (this is the
default setting), unconditionally or not encrypted.
To Next Page
Loading...
Need help?
General
