bintec elmeg be.IP swift - IP;MAC Binding Menu

Internet & Network menu 80
• Forwarding Behavior: You can set up different types of
forwarding with different levels of restriction:
o Specific device, specific port/application—forwarding
applies to exactly one device and one application or
one port.
o Specific device, all ports/applications—forwarding
applies to exactly one device, but to all ports, so any
type of traffic will be forwarded to the device.
o All devices, specific port/application—forwarding
applies to all devices on the local network, but only
to a specific application or port.
• The Remote IP Address field changes to accommodate an
IPv6 address. Entering ::0 allows all external sources.
10.5 IP/MAC Binding menu
The IP/MAC Binding menu displays a list of all clients connected to
your be.IP swift. In the process, the remaining validity period of this
configuration is displayed for the devices that have obtained an
IP configuration from your be.IP swift:
You have the option to assign a desired IP address from the
IP address pool of be.IP swift to certain devices via their
MAC address. To do this, you can activate the Static Binding option
in the list to apply a list entry as a fixed binding. You can also