Menu for telephony in operation as a telephone system 36
7.4.1 Connecting a new analog telephone
1. Connect your analog terminal device directly to an analog port
(a/b1 to a/b4) of the be.IP swift. Use the cable supplied with the
terminal device for this purpose.
2. Click on Next.
General settings
1. Standard is displayed as the Phone Type.
2. For Interface Type, the selected Phone Type Analog is displayed.
3. Select the Interface to which your analog telephone is connected
(a/b1 or a/b2).
4. Enter a description that the terminal device should show in its
display, if applicable.
Use the Add button to add the internal number.
Click on OK.
To Next Page
Loading...
