Internet & Network menu 66
10.1 Internet & Network / Local Network menu
Note
These settings may have a significant impact on your network.
As a rule, you can leave it at the default values here.
1. Enter the IP address here at which your be.IP swift is accessible.
2. Enter the corresponding netmask.
3. Give your device a host name by which it should be accessible on
the LAN.
4. Activate the Use this device as DHCPv4 server option if your
device is to be used as a DHCPv4 server to dynamically assign
an IP address to the devices within your network.
5. In the IP address range, enter the first and last IP addresses for
the DHCP address pool.
6. Use Lease Time to specify how long the IP settings assigned to
a device are valid. After the time has expired, a new assignment
is made.
7. Assign a Domain name for the range of IP addresses. Clients
that are assigned an IP address from this range can then be
reached under the name <host name>.<domain name>.
To Next Page
Loading...
Need help?
General
