bintec elmeg be.IP swift User Manual

Telephony Menu in Operation as a Media Gateway 51
8.2.3 Configuration of CompanyFlex SIP Trunk
1. For Telephony username, enter the telephony username for
authentication from the configuration portal in this format
+49199296xxxxxxxxxxxx@tel.t-online.de .
2. Enter the default Telephony password from the configuration
portal.
3. Enter the CompanyFlex SIP Trunk registration number from the
configuration portal in this format +49199296xxxxxxxxxxxx.
4. The outbound proxy must contain the 12-digit CompanyFlex-ID
from the configuration portal. be.IP swift creates the necessary
outbound proxy <companyflex-id>.primary.companyflex.de
automatically.
5. If the CompanyFlex SIP Trunk is assigned a Point to Point
number, enter the number in E.164 phone number format without
extension in this field. If there is no assigned Point to Point
number, the field remains empty.
For example: The number 0228 / 12345678 - with the extension
00–29 requires input of +4922812345678 in the Point to Point
number field. The PABX extension can be entered in the field
next to/below it.

bintec elmeg be.IP swift Specifications

General

Brand	bintec elmeg
Model	be.IP swift
Category	Network Router
Language	English