Menu for telephony in operation as a telephone system 34
7.3 Telephony / Internal Numbers menu
In this menu you set up an internal number and outgoing signaling. In
the overview, all internal phone numbers that have already been
configured are displayed.
You can edit existing entries. Use New to configure internal numbers.
1. Enter the user’s Internal Number.
2. Enter a Description to be shown in the system telephone display.
3. Select one of the set up users.
4. For Outgoing number you can select from the numbers you
configured in the Telephony Connections New menu.
Select the Default option if your own direct dial-in is to be used as
the outgoing number.
This option is available with a SIP provider with direct dial-in.
Click on Show more.
1. The Default destination option allows you to include the phone in
the group of phones that signal all calls for which no unique
destination is defined.
2. Here you can activate Access to Voice Mail. To do this, set up
voice mail number 50 in the user portal or your telephone.
Click on OK.
To Next Page
Loading...
Need help?
General
