Internet & Network menu 72
If you set up the Internet connection via an SFP module, a backup
connection is automatically created via any gateway or modem with
dynamic IP configuration connected to the WANoE port. You cannot
edit this entry here.
Note
If you want to use two Internet connections at the same time,
you must enable Load balancing in the Internet & Network > Show
More menu after setting up the second connection.
If you are only using the second connection as a backup connection in
case of failure of the first, this is not necessary. If you have already
created a second Internet connection, you will find a link into the menu
at the bottom of the overview page.
Backup WANoE scenario
If you are editing an existing backup connection, you have the option
here to deactivate it again. There are three options available for
setting up a backup connection:
• External DSL modem with access data: The backup Internet
connection is established via an external modem. On the
be.IP swift, you enter the access data for authentication with
your provider.
To Next Page
Loading...
Need help?
General
