Internet & Network menu 75
4. IPSec peers use preshared keys for authentication. The
Preshared key must be configured identically on both sides.
5. Under Select IP Address Pool, the names of all configured
IP address pools are listed. You can select an existing IP address
pool or use New to configure a new IP address pool.
6. Enter a new IP pool name.
7. All configured Local Networks are listed here.
8. Enter a new IP address range. The pool must correspond to an
existing network.
9. Select the Export configuration file for bintec Secure IPSec
Client option to create a file with the corresponding data for
importing to a bintec Secure IPSec Client.
After confirming your settings with OK, the current peer
description is displayed. You can enter the Public Gateway
address of your device and then export the required data. If the
gateway does not have a fixed public IP address, use the Domain
name of public gateway option. Here you can enter a DynDNS
name.
Click on OK.
To Next Page
Loading...
Need help?
General
