V 1.31
2021. 05 100 / 171 Doc. # : BN-OP-C7
[Grid]
If general fax paper is used for printout, it needs to be marked with a grid. A 5mm X 5mm
grid must be in a solid line with the point mark on the 1mm X 1mm location. If using
standard ECG recording paper instead of general fax paper (thermal paper), undo the
grid marking setup as the recording paper will already have it.
The grid marking setup can be done using output format selection mode. Press rotary key
or touch the intended field to select among the Grid selection items, and then the setup
will be modified as ON or OFF. If ON, the grid marks will be printed out; if OFF, it will not be
printed out.
To Next Page
Loading...
