V 1.31
2021. 05 75 / 171 Doc. # : BN-OP-C7
Touch Setup
This is a menu to set up the coordinates of the touchpad. When selecting the 'Touch'
menu at the Basic Setup page, setup page will disappear and the coordinates for setting
calibration will appear as shown below. Follow the instructions shown on the screen, and
then the coordinates will be set up.
Please input the information in the right place, otherwise the touchpad may not work
properly.
When the user selects the Touch Setup menu, all windows will disappear, and
the touch screen setup will start. No keys will be operational until the Touch
Setup is complete.
To Next Page
Loading...
