V 1.31
2021. 05 81 / 171 Doc. # : BN-OP-C7
When selecting one of the ‘Device IP’, ‘Subnet Mask’, ‘Gate Way’, the keypad will show
up. Then, input the information required and press 'OK' button to save or 'ESC' to cancel the
information.
It allows selecting the server which is available to link with the equipment in the 'Connect
to' menu.
After selecting the type of interlocking server, select the 'Setting' button; an appropriate
setup window to the choice of server will be displayed.
- When setting up the connection to the PACS Server, the Device IP should be
entered manually (manual IP input) and used. When setting up as DHCP, the
Device IP can be changed; if the setting is different from the Device IP registered
in the PACS Server, it may prevent interworking with the server.
To Next Page
Loading...
