13
How to Set BPM-1200(1010)
(1) Precautions for Settings
Pay attention when setting BPM-1200(1010) for the following points
- Use BPM-1200(1010) under conditions of 10℃∼45℃ of
circumstantial temperature and 30％∼85％ humidity.
- Check the connection status of the power cord.
- Do not connect multiple cords to the power supply.
- Place the main body on a flat area.
- If noise occurs, ground the equipment further.
- Do no use any electric cords generating connecting noise.
- Take care since the product can be broken by mechanical
shock.
- Get rid of dust or inflammable material near the product when
setting it up.
(2) Checkpoints before Use
Check the following points before measuring the patient’s condition.
- Make sure there is no mechanical risk.
- Check the lead, power plug, and accessories connected on the
outside.
◎ Precautions Before Use ECG
① Do Not use product near dynamo, X-ray equipment, broadcast
equipment.
② Use disposable electrodes.
③ Do not twist the cable.
④ Attach each Lead properly.
⑤ Keep the patient motionless with comfortable position while
measuring.
⑥ Sterilize Lead periodically.
To Next Page
Loading...
