Need help?Do you have a question about the Bionics BPM-1010 and is the answer not in the manual?
General| Product Name | Bionics BPM-1010 |
|---|---|
| Category | Medical Equipment |
| Measurement Method | Oscillometric |
| Cuff Size | 22-32cm |
| Pressure Range | 0-280 mmHg |
| Display | LCD |
Guidelines for operating the BPM-1200(1010) safely and preventing damage.
Ensuring safe electrical operation and preventing hazards.
General usage precautions covering disassembly and product installation.
Key points to consider when configuring the BPM-1200(1010) device.
Description of the front panel controls and indicators.
Step-by-step guide on operating the BPM-1200(1010) device.
Explanation of different alarm types and their meanings.
Configuration options for system, time, and print settings.
Information on battery status, life, and replacement.
Guide for connecting the ECG cable to the measurement module.
Analysis of heart rhythm abnormalities using the device.
Configuration of ST segment measurement and analysis.
Steps for measuring patient respiration using the device.
Procedure for taking blood pressure measurements.
Instructions for measuring oxygen saturation levels.
Troubleshooting common display issues.
Troubleshooting ECG and Respiration measurement problems.
Troubleshooting unstable SpO2 measurement.
Troubleshooting unstable NIBP measurement.
Troubleshooting unstable IBP measurement and waveform noise.
Troubleshooting EtCO2 measurement and connection issues.
Troubleshooting printer issues like no printing or noise.
To Next Page
