35
Power & Battery Specifications
Both AC and DC power is used for BPM-1200(1010). Basically, AC
power is used and a rechargeable battery is available for portable use.
1. AC Power (110~240VAC)
If the AC power is connected to the main body of the product, a
blue color lights up on the AC LED on the front. If the product is not
being used, the power changes automatically to the recharging
mode.
◈ During operation using AC power, noise may occur in the
waveform. If this is the case, ground the product soundly.
◈ An AC power connection in a wet or damp area may cause
electric shock or fatal damage to the product.
2. Battery Specifications
When the AC power is disconnected and the switch is turned on, the
power is supplied using the battery, signaled by the orange light on
the battery LED.
A. Signs for Battery
After use for 10 ~ 15 minutes
Low Battery requiring recharging
B. Time for 1ea of Battery
Recharging time : 7 Hours or more
Use time : 60 Minutes
(optional : 2ea battery )
(recharging : 12hour, use time : 5hour))
To Next Page
Loading...
