Bionics BPM-1010 - Change of NIBP Mode

45
The cuff too tight or too loose on the measuring site may
cause errors in the value.
(2) Change of NIBP Mode
▶ To change the setting of NIBP mode, push the Menu button
once to select NIBP.
▶ By Operating as detailed above, you cans select each
function of the NIBP mode.
Set Mode
Range for Change
Explanation
Mode
Adult / Neonate
Set Adult / Neonate measurement Mode
Auto Interval
1Min~5Min / 10Min~30Min /
1Hour~10Hour
Select the time interval, when set to
automatic measurement
STAT
Duration
5Min~15Min
Select the time interval, when set to
automatic measurement
Max
Pressure
50mmHg ~ 300mmHg
Set the limit of max pressure.
VenousSTAT
20mmHg ~ 120mmHg
Select the time 1min Venous Press.
Step 2