Bionics BPM-1010 - Change of Spo2 Mode

49
(2) Change of SpO2 Mode
▶ To change SpO2 Mode, touch the SpO2 Wave once to select
Graph.
▶ By operating as detailed above, you can select each function
of the SpO2 mode.
Set Mode
Range for Change
Explanation
Size
X 0.25, x 0.5, x 1, x 2, x 4
Set the size of SpO2 wave
SPEED
6.3, 12.5, 25 mm/sec
Set the speed of SpO2 wave
APG
Suspend / Expression
APG Select
TRACE
ON / OFF
Set the display of waveform