◈ Interpretation of the measurement value of arterial blood
pressure should be performed by medical professionals.
◈ Arterial blood pressure may be influenced by the patient’s
posture, physical condition and other factors such as a patient’s
movement.
◈ The product may not work well when it is kept or operated
beyond the temperature and humidity specified.
◈ Since the use of the inappropriate sensors such as a sensor
that is too tightly wrapped with adhesive tape or use of
additional adhesive tape, lack of a periodical check, or
inappropriate setting of sensors may lead to skin injuries and
inaccurate measurement results. The user should read the
manual and the precautions carefully before use.
◈ Premature neonates and patients with chronic pulmonary
disease should be checked for oxygenation levels before
starting treatment.
◈ Sensor-attached sites should be checked at least every 8 hours
(every 4 hours for reusable finger sensors on adults). Please
check if the sensors are properly attached, if the skin condition
is normal, and if the sensors are well positioned. Nail polish or
calluses may obstruct measurement. Special care is required for
patients with poor blood flow. If the sensor attachment status is
not checked periodically, it may lead to skin injury by extended
contact and necrosis from the pressure. Patients with weak
blood flow should be checked every 2 hours.
◈ If you want to turn off the BPM-1200(1010) while you’re
operating, please use the power switch where is the front of the
product.
To Next Page
Loading...
