Operating instruction EC IIAbout the device
2 − 4
6.107.98.5.01.44
2.7 Standards and guidelines
The equipment fulfils the following requirements:
Measuring technology
Guideline 90/384/EEC Scales guidelines for ”non−automatic scales”
OIML R76−Ed. 2006 Organisation internationale de métrologie légale Nonautomatic
weighing instruments
DIN EN 45501 Metrological aspects of non−automatic scales
WELMEC 2.3 Guideline for software testing
Handbook 44 Specifications, tolerances and other technical requirements for
weighing and measuring devices (USA)
Publication 14 Weighing devices, Checklist, Test procedures (USA)
Weights and Measures Act (Kanada)
Electromagnetic compatibilit
Guideline 2004/108/EC EMC guideline
DIN EN 61000−6−1/ 08.02 Immunity to interference
Residential, commercial and light industry
DIN EN 61000−6−3/ 06.05 Emitted interference
Residential, commercial and light industry
DIN EN 61000−3−2 Harmonic currents
DIN EN 61000−3−3 Voltage fluctuations and flickers
DIN EN 55011 (class B) Industrial, scientific and medical high frequency equipment
(ISM equipment) − Radio interference − Threshold values and
methods of measurement.
GB 9254−1998 Information Technology Equipment − Radio Disturbance
Characteristics − Limits and Methods of Measurement
Electrical safety
Guideline 2006/95/EC Low voltage guideline
IEC 60950−1/ 2001 Information technology equipment − Safety
DIN EN 60950−1/ 03.03 Information technology equipment − Safety
UL 60950−1/ 07.06 Information technology equipment − Safety
DIN EN 60529 Housing protection classes (IP code)
2
To Next Page
Loading...
Need help?
General
